Business Hours:
Monday 7:30am - 4:30pm
Tuesday 7:30am - 4:30pm
Wednesday 7:30am - 4:30pm
Thursday 7:30am - 4:30pm
Friday 7:30am - 4:30pm
Saturday 9:00am - 3:00pm
Sunday Closed
https://www.kcplumb.ca/heating/furnace-service
You can maintain a furnace system a number of different ways. Chances are good that the system shall be running full-time in the winter. Actually, it is usually on more than it must be because it is unable to maintain an efficient climate. When trouble shooting and optimizingthe heating portion of your heating system, there are several things to consider.
This subject is what gets talked about probably the most in talks about heating maintenance, but is usually neglected. When there is a obstruction, you either run the risk of not distributing heat appropriately or perhaps starting a fire.When the filter is dirty air cannot flow through as well which suggests the unit must work harder and will also mean a risk of fire. If the system is not circulating heat efficiently, it is working overtime. The fire situation is obviously self-explanatory. Neither situation is good for your wallet or your well-being..
Look at the blower blades and clean them up. A grimy fan will work overtime to blow air around and of course use more energy to maintain the temperature level you choose it at. Therefore the system is over taxed and costing more money to run.
Be sure to check your fire damper for correct functioning. The fire damper is self-explanatory so take note of this component.
It is feasible that your ducts have become impaired over the years for various reasons. If a duct has collapsed or become obstructed, the system will think that the proper temperature has been achieved, which will be false. Inevitably your equipment will be straining to maintain your house cool as you keep on lowering the thermostat to get to comfy settings.
It is easyto overlook the insulation, but is one of the most common reason behind a system malfunctioning. Be sure to check the insulation and confirm it has never become wobbly and resulted in gaps involving the ductwork and the exterior. When this has happened the system will work more than wanted while attempting to reach optimal temperature.
Make sure the ductwork is hooked up in all places to all pieces. These detachments can cause gaps in the ventilation and result in a loss of hot air in your house, since it is going to be escaping through the holes.
Be sure to check that return air intakes are clean and in working order or your system will be out of balance.
Take a look at the zone dampers to check if they are in the correct place. Sometimes a damper might get moved by mistake like when you need to fit by it, or make space for storage. Check to notice that the dampers are in the correct position too.
If that is a tad too much to handle by yourself, we suggest you hire a furnace service company licensed for furnace and heating repair. You should be able to find a reputable heating company who will deal with this for you. The most sage advice we can provide is to establish annual maintenance for that appliance.